您是不是在找 | 更多 | |
品牌 | 更多 | |
库存现货 |
Alkon 控制空气阀 375-02-001-60-5 产品特点
电磁阀组件可靠保护。
各种标准ACor DCvoltage选项。用于压力计的 90° 压力隔离器,螺纹尺寸为 1/4“,安装时带旋转螺母,用于压力计方向
90°带手轮的针阀
碳钢
压力表隔离针阀 FT 291(90° 角)通常用于保护压力表,因为它们具有双重功能,即在打开时抑制压力冲击,并将其与压力管线隔离 采用高电阻钢模制而成,经过精确处理,经过严格的测试,它们确保可靠性和长寿命。旋转旋转螺母允许用户通过一次锁定操作将压力计插入,将其引导到更合适的位置。密封件作为标准提供,并插入螺母中,可防止连接和仪表之间的任何泄漏。对于带锥形螺纹的压力表,必须使用技术目录中显示的铜垫圈 FT 1201 和(需单独申请)。配备 FT 299-24 连接器,还允许与 1/2“ BSP 端口连接(作为替代方案,我们建议使用 FT 290-12 系列)。适用于高达 400 bar 的压力和 -20° 至 +100° 的温度,可根据要求使用面板螺母 (G) 进行面板安装。根据要求: • 带连接的型号 内螺纹/内螺纹 (01) • 用于刚性管道 (04) • 用于柔性管道 (05) • 氟橡胶密封件 (V) • 配有锁紧螺母 (G),指示是 KM 还是六角 • AISI 316 代码 FT 2291 版本
ALCO VALVES 针形阀 NM16SS-6MM-GP
The precision made ‘N’ series, single isolation hand valve utilising metal to metal seat and body to bonnet connection for superior, bubble tight sealing capabilities at both extreme pressures and temperatures.
As standard the 'N' Series is manufactured in 316/316L S11 stainless steel (N.A.C.E.MR.01.75 latest rev.) Dual certified, Duplex, Monel, Inconel, Hastalloy, Titanium, Ali-Bronze etc.ALCO VALVES 针形阀 NM16SS-10MM-GP
The precision made ‘N’ series, single isolation hand valve utilising metal to metal seat and body to bonnet connection for superior, bubble tight sealing capabilities at both extreme pressures and temperatures.
As standard the 'N' Series is manufactured in 316/316L S11 stainless steel (N.A.C.E.MR.01.75 latest rev.) Dual certified, Duplex, Monel, Inconel, Hastalloy, Titanium, Ali-Bronze etc.
Threaded end connections include NPT, BSPP and BSPT. Other connections include single or twin-ferrule / tube connections. The “N” series also offers non-rotating hardened tip for extended service life. The unique anti-vibration cam locking device at the body bonnet connection is for extra safety.
Working pressure is 6,000 psi (414bar) as standard. Maximum working temperature up to 230°C and up to 570°C with GP option at reduced pressure. Other options such as locking device, hand-wheel and integral venting facility are also available.
ALCO VALVES 针形阀 NM28SS-20MM-GP
The precision made ‘N’ series, single isolation hand valve utilising metal to metal seat and body to bonnet connection for superior, bubble tight sealing capabilities at both extreme pressures and temperatures.
As standard the 'N' Series is manufactured in 316/316L S11 stainless steel (N.A.C.E.MR.01.75 latest rev.) Dual certified, Duplex, Monel, Inconel, Hastalloy, Titanium, Ali-Bronze etc.